Auto Parts High Low Temp Resistant Spark Plug Cable Connectors Replacement

Auto Parts High / Low Temp Resistant Silicone Rubber Plug connecting Spark Plug

Standard for spark plug wire connector:

1. ISO 6856
2. ISO 3808

Customers:

1. BorgWarner, JANMOR etc.

Connector characteristics

Heat and cold resistance
Great dielectric properties
Acid and alkali resistance
No deformation, no dilatation
Good uniformity of dimension
Can be customized based on customers

Applications:

1. The connector is used in the ignition system of auto engine, see picture below:

Specifications and description:

Raw material properties	Shore-A hardness	55±5A
	Elongation at break	≥300%
	Tear strength	≥15N/mm
	Dielectric strength	≥20KV/mm
	Tensile strength	≥6N/mm2
	Tensile deformation	≤20%
	Density	1.17±0.02 g/cm3
	Withstand voltage 18KV for 30minutes	NO breakdown
	Surface resistance	≥1011Ω
	Ageing resistance	155±2.5℃X168h,Without any cracking
Connector characteristics	Usage temperature	-20℃-155℃
	Breakdown voltage (AC)	≥30KV
	Insertion and removal forces	20-70N
	Overall length	/
	Resistance	1KΩ±20%
	Lifetime	≥50,000km / ≥3years
	Heat and cold resistance
	Great dielectric properties
	Acid and alkali resistance
	No deformation, no dilatation
	Good uniformity of dimension
	Can be customized based on customers
Assembly dimension	Cable entry diameter	5.5±0.5mm
	Assembly dimension: connecting cable
	Plug entry diameter	14±0.5mm
	Assembly dimension: connecting spark plug

Established in 1999, Nanjing Tianyi (TY) is a specialized manufacturer of automobile parts such as ignition coils, ignition cable sets, insulating sleeve and resistor for spark plug. Located in Dongping Industrial Park of Lishui County in Nanjing, just 10, 0.5 and 1 kilometers away from Nanjing Lukou International Airport, Jiangsu Yanjiang Highway and Ninghang Highway individually,TY enjoy convenient access to major transportation networks.

The company occupies about 17,350 square meters area and owns many advanced facilities. In the factory, workshops for rubber boot and subassembly, resistor, ignition coil, non-framed coil and molding are all established.

The rubber boot and subassembly workshop adopts rubber injection molding machine. The daily production capability has been over 100 thousand. These products are mainly applied in varieties of automobile and motorcycle engines.

With plastic injection molding machine in the resistor workshop, the daily capacity can reach over 80 thousand. These resistors are mainly used in auto engines and boiler ignition system.